Moffat G518A-RB, G518C-LS, G518B-LS, G518C-RB, G518D-B User Manual

...

Technical data sheet for

GAS COOKTOPS 1200mm

G518D-B, G518D-CB, G518D-LS, G518D-RB, G518C-B, G518C-CB, G518C-LS, G518C-RB, G518B-B, G518B-CB, G518B-LS, G518B-RB, G518A-B, G518A-CB, G518A-LS, G518A-RB

Heavy-duty construction 28 MJ/hr open burners Flame failure standard Pilot burners optional 300mm, 600mm, and 900mm griddle

plate options

Optional simmer plates 3 models of base unit 1 model of ventilated refrigeration base

with drawer/door options

Rear rollers Stainless steel exterior Easy clean Easy service Fully modular

Overall Construction

Cooktop

• Welded hob with 1.5mm 304 stainless steel bull nose

• Side panels 1.2mm 304 stainless steel

• Splashback 1.2mm 304 stainless steel

• Vitreous enamelled control panel

• Aluminised steel internal construction

• Cast iron 28MJ/hr open burners with forged brass cap

• Vitreous enamelled cast iron potstands

• Vitreous enamelled open burner spill covers

• Cast iron simmer plates (optional extra)

• 12mm thick mild steel griddle plate

• 2.5mm 304 stainless steel griddle splash guards

• Stainless steel spill trays Griddle sections are standard on RH side. Available on LH side and

centres to order or by conversion.

Bench mount (supplied as –B model)

• Four 63mm dia. heavy-dut y 1.2mm 304 stainless steel bench legs with adjustable feet

• Adjustable height 80mm – 105mm

Cabinet base (supplied as –CB model)

• Fully modular for match suite ﬁnish

• Double skin 0.9mm 304 stainless steel interior and exterior

• Optional GN 1/1 4 position racking kit (1 or 2 cabinet bays)

• Up to eight 65mm GN 1/1 capacity

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two adjustable feet at front and two rollers at rear

Leg stand (supplied as –LS model)

• Fully modular for matched suite ﬁnish

• Framed top for connection to Cooktop

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with two adjustable feet at front and two rollers at rear

• Fully modular framed stand shelf with 0.9mm 304 stainless steel ﬁnish

• Shelf to top stainless steel backstop panel for convenience and rigidity

• Suitable for rear or through shelf gas connection to Cooktop

• Quick assembly design

Refrigerated base (supplied as –RB model)

• Self contained suite matched modular base

• Ventilated system with R134a refrigerant

• -2° to + 8°C temperature (Tropical Climate rated)

• Two GN 1/1 drawers and one door standard

• 100mm deep pan dr awer capacity

• Heav y-duty European telescopic drawer guides

• Magnetic drawer gaskets (replaceable without tools)

• 50mm fully foamed CFC free insulation

• 304 stainless steel exterior and interior

• Anti-corrosion treated evaporator

• No condensate drain required

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with adjustable feet

• Condensing unit removable through front of unit for service

• Easy clean interior

Controls

Cooktop

• Variable high to low controls to open burners

• Open burners ﬂame failure standard with pilot burners optional

• Variable high to low controls to griddles

• Griddles standard with pilot, ﬂame failure and piezo ignition

• Large easy use control knob - heat resistant reinforced

• Easy view control settings on knob

Refrigerated base

• Digital control electronic thermostat

• Automatic defrost

• Automatic evaporation of defrost water

• -2° to +8°C temperature range

Cleaning and Servicing

• All models with easy clean stainless steel external ﬁnish

• Lift off burner heads and vitreous enamelled burner spill covers

• Stainless steel spill trays under open burner and griddle sections

• Access to all parts from front of unit

• Refrigerated Base condenser removable through front of unit

G518D-LS

4825 BS specsNZ-AUSv20B2.indd 39 28/12/06 2:32:03 PM

Technical data sheet for

GAS COOKTOPS 1200mm

Speciﬁcations

Burners

Open Burners 28MJ/hr dual ﬂame ring with simmer r ate Griddle Burners 20MJ/hr per 300mm section

Gas power

G518D 224 MJ/hr, 62.2kW G518C 188 MJ/hr, 52.2kW G518B 152 MJ/hr, 42.2kW G518A 116 MJ/hr, 32.2kW

Griddle Plate

300mm Griddle cooking sur face 292mm x 475mm, 1387cm2 600mm Griddle cooking sur face 592mm x 475mm, 2812cm2 900mm Griddle cooking sur face 892mm x 475mm, 4237cm2

Gas connection

R 3/4 (BSP) male All units supplied with Natur al and LP gas regulator

Refrigerated base Type

Ventilated system

Refrigerant

R134a (160grams)

Climate classiﬁcation

T – tropical

Electrical connection

220-240Vac, 50Hz, 1.8A , 1P+N+E 3 pin 10A plug cordset ﬁtted

Dimensions

Bench models

Width 1200mm Depth 812mm Height 315mm Incl. splashback 485mm

All models (excluding Bench model)

Width 1200mm Depth 812mm Height 915mm Incl. splashback 1085mm

Packing data

Bench and Leg Stand models

0.72m3 Width 1245mm Depth 870mm Height 665mm

Cabinet Base and Refriger ated Base models

1.36m3 Width 1245mm Depth 870mm Height 1255mm

Gas types

Available in Natural gas and LP gas, please specify when ordering Units supplied complete with gas type conversion kits Other gas types on request

Options

Adjustable feet at rear Simmer plates (replaces Potstand) Ribbed griddle plates Joining caps Castors

G518-B

G518D

G518C

G518B

G518A

G518-LS

G518-CB

G518-RB

4825 BS specsNZ-AUSv20B2.indd 40 28/12/06 2:32:04 PM