Page 1
Technical data sheet for
FAST FRI TWIN PAN
ELECTRIC FRYER 450mm
FN8224EE
17kW high performance twin pan fryer
2 digital display temperature control 4 basket
timers
Easy clean stainless steel open pan with 10
year limited warranty
12L per pan oil capacity
25mm (1”) drain valves
Stainless steel exterior
Easy service
Fully modular
Overall Construction
• Stainless steel pan
• Bull nose welded 1.5mm 304 stainless steel
• Splashback 1.5mm 304 stainless steel
• Side panels 1.2mm 304 stainless steel
• Double skin door with 0.9mm 304 stainless exterior
• Hinge out counterbalanced heating elements
• 25mm (1”) drain valves
• 150mm legs in 63mm dia. heavy-duty 1.2mm 304 stainless steel with
adjustable feet
• 2 baskets and stainless steel lid supplied standard
Controls
• Digital display electronic thermostats
• Thermostat range 88-195˚C
• 2 programmable basket timers with countdown display and alarms
per pan
• Heating and basket drop displays
• Programmable melt cycles
• Fail-safe over-temperature safety cut-outs
• Element tilt switch for heating cut-out on element lift
Cleaning and Servicing
• Open stainless steel pans with hinge out elements for easy clean
• Easy clean basket support bar
• 25mm (1”) drain valves for ef fective draining
• Easy clean stainless steel exterior
• Access to all parts from front of unit
Page 2
Technical data sheet for
FAST FRI TWIN PAN
ELECTRIC FRYER 450mm
Specifications
Production rate
31kg/hr
Pan Size (per pan)
Oil capacity 12L (24lbs shortening)
Width 175mm
Length 380mm
Oil frying depth 95mm
Baskets
2 chrome plated wire baskets
140mm W x 335mm D x 145mm H
Elements (per pan)
3 x 2.83kW stainless steel heating elements
Electrical requirements
17kW, 400-415Vac, 50/60hz, 3P+N+E
L 1 23.6A
L2 23.6A
L3 23.6A
Electrical connection
62mm from RH side, 365mm from rear,
and 440mm from floor
Dimensions
Width 450mm
Depth 805mm
Height 915mm
Incl. splashback 1130mm
Pack in g data
0.53m3
Width 865mm
Depth 490mm
Height 1255mm
Options at extra cost
Waldorf Filtamax filtration system
Extra baskets
Side splash guards
Joining caps
Castors
Plinth mounting
FN8224EE
Australia
www.moffat.com.au
New Zealand
www.moffat.co.nz
Australia
Moffat Pty Limited
Victoria/Tasmania
740 Springvale Road
Mulgrave, Victoria 3170
Telephone 03-9518 3888
Facsimile 03-9518 3833
vsales@moffat.com.au
New South Wales
Telephone 02-8833 4111
nswsales@moffat.com.au
South Australia
Telephone 03-9518 3888
vsales@moffat.com.au
Queensland
Telephone 07-3630 8600
qldsales@moffat.com.au
Western Australia
Telephone 08-9562 0263
jberent@moffat.com.au
New Zealand
Moffat Limited
Christchurch
Telephone 03-389 1007
sales@moffat.co.nz
Auckland
Telephone 09-574 3150
sales@moffat.co.nz
ISO9001
Quality
Management
Standard
Designed and manufactured by
ISO9001
All Waldorf products are designed and
manufactured by Moffat using the
internationally recognised ISO9001 quality
management system, covering design,
manufacture and final inspection, ensuring
consistent high quality at all times.
In line with policy to continually develop and
improve its products, Moffat Limited reserves
the right to change specifications and design
without notice.
Printed in New Zealand
© Copyright Mo ffat Limited
Moffat/4639/BH/1M/8.05
Loading...