Page 1
Technical data sheet for
GAS CHARGRILL
300mm, 600mm, 900mm, 1200mm
CH8300G-B, CH8600G-LS, CH8900G-LS, CH8120G-LSCH8600G-LS, CH8900G-LS, CH8120G-LS
Heavy-duty construction
Reversible heavy-duty top grates
Interchangeable drop on griddle plates
33MJ/hr stainless steel burners per 300mm section
Stainless steel exterior
Easy clean
Easy service
Fully modular
CH8120G-LS
Ov e ral l C o ns t ru c ti on
Chargril l
• 2.5mm thick 304 stainless steel side splash guards
• Welded 1.5mm 304 stainless steel bull nose
• Welded splashback and side panels 1.2mm 304 stainless steel
• Front panels 0.9mm 304 stainless steel
• Front grease channel
• Welded 1.2mm 304 stainless steel grease trays
• 1.5mm aluminised steel burner box
• Insulated sides
Leg stand
• Fully modular for matched suite finish
• Framed top for connection to Chargrill
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
adjustable feet
• Fully modular framed stand shelf with 0.9mm 304 stainless
steel finish
• Quick assembly design
Gr ates a nd r adian ts and ba ffles
• 150mm wide x 550mm top grate sections
• Top grates reversible for level or inclined use
• Inclined position incorporates flare reducing grate fin design with
grooves to run grease into front collection channel
• Heavy weight castings for high demand performance
• Heavy-duty high efficiency cast iron burner radiants improves
heat retention and protects burners
• Baffles over grease trays to reduce grease collection flare ups
Griddle plate s
• Optional extra 300mm wide and 450mm wide x 550mm deep drop on
cast iron griddle sections
• Machined smooth surface finish
• Interchangeable in any position with 2 or 3 sections of top grate
• Multiple griddle sections can be mixed in any position
Burner s
• Full 304 stainless steel burners
• 1 x 33MJ/hr burner per 300mm section
• Removable for cleaning
• Full pilot and flame failure protection per burner
Con tro l s
• Individual Hi-Lo gas control to each burner with flame failure and pilot
• Large easy use control knob - heat resistant reinforced
• Easy view control settings on knob
• Piezo ignition to pilot burner
Cle a ning an d S er vi cin g
• Easy clean stainless steel external finish
• Lift out radiants, burners and grease tray baffles
• All burner box interior parts lift out for full cleaning access
• Deep stainless steel grease collection trays
• Access to all parts from front of unit
Page 2
Technical data sheet for
GAS CHARGRILL
300mm, 600600mm, 900mm, 1200mm
Spe ci f ic at i ons
Burner
33MJ/hr 304 stainless steel U-burner per
300mm section
Gas power
CH8300G-B 33MJ/hr, 9.8kW
CH8600G-LS 66MJ/hr, 18.6kW
CH8900G-LS 100MJ/hr, 29.3kW
CH8120G-LS 133MJ/hr, 39.1kW
Cooking surface area
CH8300G-B 292mm x 500mm, 1460cm2
CH8600G-LS 592mm x 500mm, 2960cm2
CH8900G-LS 892mm x 500mm, 4460cm2
CH8120G-LS 1192mm x 500mm, 5960cm2
Gas connection
R 3/4 (BSP) male
All units supplied with Natural and LP gas
regulator
Dimens ions
Width
300mm CH8300G-B
Depth 805mm
Height 315mm
Incl. splashback 530mm
Width
600mm CH8600G-LS
900mm CH8900G-LS
1200mm CH8120G-LS
Depth 805mm
Height 915mm
Incl. splashback 1130mm
Ne tt weight
300mm 63kg
600mm 128kg
900mm 178kg
1200mm 227kg
Packing data
300mm
0.20m3, 86kg
Width 865mm
Depth 345mm
Height 665mm
600mm
0.48m3, 171kg
Width 645mm
Depth 870mm
Height 855mm
900mm
0.70m3, 232kg
Width 945mm
Depth 870mm
Height 855mm
1200mm
0.93m3, 295kg
Width 1245mm
Depth 870mm
Height 855mm
Ga s t ypes
Available in Natural gas and LP gas, please
specify when ordering
Units supplied complete with gas type
conversion kits
Other gas types on request
Op tions at ex tra cos t
Griddle plates 300mm drop on
Griddle plates 450mm drop on
Joining caps
Castors
Plinth mounting
CH8300 G-L S
CH86 00G -LS
CH8900G -LS
CH8120 G-L S
Loading...