Moffat CH8120G-LS, CH8900G-LS, CH8300G-B, CH8600G-LS User Manual

Technical data sheet for

GAS CHARGRILL
300mm, 600mm, 900mm, 1200mm

CH8300G-B, CH8600G-LS, CH8900G-LS, CH8120G-LSCH8600G-LS, CH8900G-LS, CH8120G-LS

Heavy-duty construction

Reversible heavy-duty top grates

Interchangeable drop on griddle plates

33MJ/hr stainless steel burners per 300mm section

Stainless steel exterior

Easy clean

Easy service

Fully modular

CH8120G-LS

Ov e ral l C o ns t ru c ti on

Chargril l

• 2.5mm thick 304 stainless steel side splash guards

• Welded 1.5mm 304 stainless steel bull nose

• Welded splashback and side panels 1.2mm 304 stainless steel

• Front panels 0.9mm 304 stainless steel

• Front grease channel

• Welded 1.2mm 304 stainless steel grease trays

• 1.5mm aluminised steel burner box

• Insulated sides

Leg stand

• Fully modular for matched suite finish

• Framed top for connection to Chargrill

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
adjustable feet

• Fully modular framed stand shelf with 0.9mm 304 stainless
steel finish

• Quick assembly design

Gr ates a nd r adian ts and ba ffles

• 150mm wide x 550mm top grate sections

• Top grates reversible for level or inclined use

• Inclined position incorporates flare reducing grate fin design with
grooves to run grease into front collection channel

• Heavy weight castings for high demand performance

• Heavy-duty high efficiency cast iron burner radiants improves
heat retention and protects burners

• Baffles over grease trays to reduce grease collection flare ups

Griddle plate s

• Optional extra 300mm wide and 450mm wide x 550mm deep drop on
cast iron griddle sections

• Machined smooth surface finish

• Interchangeable in any position with 2 or 3 sections of top grate

• Multiple griddle sections can be mixed in any position

Burner s

• Full 304 stainless steel burners

• 1 x 33MJ/hr burner per 300mm section

• Removable for cleaning

• Full pilot and flame failure protection per burner

Con tro l s

• Individual Hi-Lo gas control to each burner with flame failure and pilot

• Large easy use control knob - heat resistant reinforced

• Easy view control settings on knob

• Piezo ignition to pilot burner

Cle a ning an d S er vi cin g

• Easy clean stainless steel external finish

• Lift out radiants, burners and grease tray baffles

• All burner box interior parts lift out for full cleaning access

• Deep stainless steel grease collection trays

• Access to all parts from front of unit

Technical data sheet for

GAS CHARGRILL

300mm, 600600mm, 900mm, 1200mm

Spe ci f ic at i ons

Burner

33MJ/hr 304 stainless steel U-burner per
300mm section

Gas power

CH8300G-B 33MJ/hr, 9.8kW
CH8600G-LS 66MJ/hr, 18.6kW
CH8900G-LS 100MJ/hr, 29.3kW
CH8120G-LS 133MJ/hr, 39.1kW

Cooking surface area

CH8300G-B 292mm x 500mm, 1460cm2
CH8600G-LS 592mm x 500mm, 2960cm2
CH8900G-LS 892mm x 500mm, 4460cm2
CH8120G-LS 1192mm x 500mm, 5960cm2

Gas connection

R 3/4 (BSP) male
All units supplied with Natural and LP gas

regulator

Dimens ions

Width
300mm CH8300G-B
Depth 805mm
Height 315mm
Incl. splashback 530mm
Width
600mm CH8600G-LS
900mm CH8900G-LS
1200mm CH8120G-LS
Depth 805mm
Height 915mm
Incl. splashback 1130mm

Ne tt weight

300mm 63kg
600mm 128kg
900mm 178kg
1200mm 227kg

Packing data

300mm

0.20m3, 86kg
Width 865mm
Depth 345mm
Height 665mm

600mm

0.48m3, 171kg
Width 645mm
Depth 870mm
Height 855mm

900mm

0.70m3, 232kg
Width 945mm
Depth 870mm
Height 855mm

1200mm

0.93m3, 295kg
Width 1245mm
Depth 870mm
Height 855mm

Ga s t ypes

Available in Natural gas and LP gas, please
specify when ordering

Units supplied complete with gas type
conversion kits

Other gas types on request

Op tions at ex tra cos t

Griddle plates 300mm drop on
Griddle plates 450mm drop on
Joining caps
Castors
Plinth mounting

CH8300 G-L S

CH86 00G -LS

CH8900G -LS

CH8120 G-L S