Moffat CD200 User Manual

Rack Conveyors

Technical data sheet for

CD200

4 Stage Conveyor

Dishwasher

W 2700mm x D 765mm x H 1450mm

The CD 200 is a fully automatic rack conveyor dishwasher with powerful prewash and wash zones plus ecorinse - now a triple ﬁnal rinse system. The rinse economiser switch ensures that water is consumed only when racks are in the ﬁnal rinse zone.

Standard Features

• Low water consumption - 300 litres per hour maximum

• Rinse economiser - machine uses water only when rack is in rinse zone

• Powerful wash via removable upper and lower stainless steel wash arms

• Automatic tank ﬁll and run-dry protection for incalloy heating elements

• Interlocked wash and rinse heating

C Series

CD200

• Low temperature deactivation to ensure hygiene and regulatory compliance

• Powerful drive with safety clutch and optional bench stop switch

• Safety stop switches to all doors

• Vent hoods ﬁtted standard with

duct connections, baes and easy bench connection

• Full width, easily removable wash ﬁlter trays

• All stainless steel construction

• Simple electromechanical controls for ease of service

• Adjustable 200mm stainless legs

• Modular range includes options to allow installation in minimal area

• CAD design service for layout options

• Nationwide installation and after sales support

• 4 stage rack conveyor dishwasher with powerful prewash and wash

zones and a triple ﬁnal rinse system

• 200 racks per hour standard setting - higher throughput on request to

240 racks per hour

• 0.8kW pre-wash pump

• Triple ﬁnal rinse

• 1.5kW wash pump

The unit shall be a Watermark certiﬁed Washtech rack conveyor dishwasher capable of washing 200 racks per hour, with maximum water consumption of 300 litres per hour. The unit shall be supplied with 500mm cup and dishracks and have a vertical wash chamber clearance of 400mm. The unit shall be ﬁtted with a 0.75kW prewash pump, a

1.5kW wash pump and a separate dedicated double ﬁnal rinse module, plus removable all stainless rinse arms and wash arms in cassettes all with removable end plugs for easy cleaning. Access to the wash chamber shall be via a full width countersprung front door. The unit shall be ﬁtted with dual drive bars, automatic ﬁll and low level water protection and a rinse economizer to ensure that water is consumed only while racks are in the rinse zone. The unit shall be shipped in 100% recyclable packaging. Height of machine shown includes height with maximum 60mm adjustable leg option in use.

Rack Conveyors

C Series

CD200

Australia

www.moat.com.au

New Zealand

www.moat.co.nz

Australia Moat Pty Limited

Victoria/Tasmania 740 Springvale Road Mulgrave, Victoria 3170 Telephone 03-9518 3888 Facsimile 03-9518 3833 vsales@moat.com.au www.moat.com.au

New South Wales Telephone 02-8833 4111 nswsales@moat.com.au

South Australia Telephone 03-9518 3888 vsales@moat.com.au

Queensland Telephone 07-3630 8600 qldsales@moat.com.au

Western Australia Telephone 08-9202 6820 bgarcia@moat.com.au

New Zealand Moat Limited Christchurch 16 Osborne Street Christchurch 8011 Telephone +64 3-389 1007 Facsimile +64 3-389 1276 Auckland Telephone +64 9-574 3150 export@moat.co.nz www.moat.co.nz

Hot Water

Waste

Electrical

Cold Water

Dimensions

Width Depth Height Weight

temperature connection pressure ﬂow quality

connection line

3phase N+E 415V 50Hz

Details as per (A)

Refer operator manual for complete installation instructions.

2700mm 765mm 1450mm 340kg

65C 3/4” 200-350 kPa 20 litres per min potable & soft

1.5 BSP 2” BSP

40 amp

Packed Dimensions

Width Depth Height Weight Cubicmetres

2905mm 875mm 1510mm 440kg

3.84m³