Moffat C6B User Manual
TECHNICAL DATA SHEET FOR
Gas Cooktop / Griddle 600mm
C6D, C6C, C6B
600mm wide
Stainless steel finish
22MJ burners
Cast iron burners and vitreous enamel
pot stands
2 or 4 open burner configuration
Griddle options – 300mm and 600mm
machine finished 12mm thickness, with
piezo ignition
Open cabinet base for extra storage
Adjustable front feet and rear rollers
Fully modular
Optional: Flame failure protection on
open burners
C6D
Overall Construction
Cast iron open burner heads with vitreous enamelled cast
iron caps
Vitreous enamelled potstands
12mm machined surface mild steel griddle plates
Stainless steel front, sides and splashback
Stainless steel cabinet interior base
Aluminised steel spill tray
Griddle sections are standard on RH side only.
50mm dia. stainless steel adjustable legs to front and two
rollers at rear
Controls
Large easy use control knobs
Variable high to low controls to open and griddle burners
Optional flame failure on open burners
Griddles standard with pilot, flame failure and piezo ignition
Cleaning and Servicing
Easy clean stainless steel exterior
Vitreous enamelled potstands and burner caps
Lift off open burner caps and removable burners
Removable spill trays
Stainless steel grease trays on griddles
Access to all parts from front of unit
TECHNICAL DATA SHEET FOR
Gas Cooktop / Griddle 600mm
C6D, C6C, C6B
Burners
Open Burners;
22MJ/hr, 5.5kW each
Griddle Burners;
20MJ/hr, 5.0kW per 300mm section
Gas power
C6D 88MJ/hr, 22kW
C6C 64MJ/hr, 16kW
C6B 40MJ/hr, 10kW
Gas connection
3
R
/4 (BSP) male
130mm from RH side, 20mm from
rear, and 655mm from floor
All units supplied with Natural and
LP gas regulator
Dimensions
Width 600mm
Depth 800mm
Height 915mm
Incl. splashback 1085mm
Packing data
0.70m3
Width 640mm
Depth 865mm
Height 1255mm
72kg nett weight
122kg packed weight
Gas types
Available in Natural gas and LP gas,
please specify when ordering
Other gas types on request
www.moffat.com.au
Australia
Moffat Pty Limited
Victoria/Tasmania
740 Springvale Road
Mulgrave, Victoria 3170
Ph 03-9518 3888
Fax 03-9518 3833
vsales@moffat.com.au
www.moffat.com.au
New South Wales
Ph 02-8833 4111
nswsales@moffat.com.au
South Australia
Ph 03-9518 3888
vsales@moffat.com.au
Queensland
Ph 07-3630 8600
qldsales@moffat.com.au
Western Australia
Ph 08-9202 6820
bgarcia@moffat.com.au
New Zealand
Moffat Limited
Christchurch
16 Osborne Street
Christchurch 8011
Ph +64 3-389 1007
Fax +64 3-389 1276
Auckland
Ph +64 9-574 3150
export@moffat.co.nz
www.moffat.co.nz
C6
C6D C6C C6B
ISO9001
Quality
Management
Standard
Designed and manufactured by
ISO9001
All Cobra products are designed and
manufactured by Moffat using the
internationally recognised ISO9001
quality management system, covering
design, manufacture and final
inspection, ensuring consistent high
quality at all times.
In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change
specifications and design without notice.
© Copyright Moffat Ltd
Moffat 4.08
Loading...