4517 BS ACSeries specs V3 24/6/05 10:52 AM Page 19
TECHNICAL SPECIFICATION SHEET FOR
BLUE SEAL GAS COMBI STEAMER
AC SERIES G40AC DD 40 x 1/1GN or 20 x 2/1
General features:
- Direct steam injection system
- High efficiency heat exchanger and gas burner
system
- Stainless steel construction
- Hygienic rounded corners in oven cavity
- Pivoting fan suction panel
- Front removable control panel for easy
servicing
- Hygienic plug-in door seal for easy to
remove day-to-day cleaning
- Adjustable door hinges
- Self draining door condensate drip tray
- Hand shower
- Oven lights
- Oven door handle with progressive brake
mechanism
- Cool to touch double glazed door
- Hinged inner glass for easy cleaning
- Constant self-diagnosis for error
recognition
Standard features:
- Electronic manual control panel with
cooking modes
- Electronic thermostat 30°C - 300°C
- Electronic timer
- Auto-reversing fan rotation
- Cavity fast cool down which automatically
stops at 50°C
- Automatic cavity cool down between high
temperature cycles and the next cycle
featuring a lower temperature
- Manual humidifier or programmable
- Manual vent to evacuate the excess humidity
- Automatic quenching of vapours into the
oven drain
- Cavity clean program
- Energy saving device for a reduced energy
consumption
Optional features:
- Interchangeable core probes with external
socket
- Marine and special voltages
- LPG Version
- Connection for an external printer
(type RS232)
- Connection for energy saving system
Cooking programmes:
Steaming 30°C - 130°C
- For steaming, stewing and
poaching
Combination 30°C - 300°C
- For roasting and baking
Convection 30°C - 300°C
- For grilling, quick roasting,
baking, toasting and gratinating
Regeneration (Reheating)
- Pre-set Programs
R1 for reheating of plated meals
R2 for reheating of gastronorm
containers
RP reheating with manual setting
of time and temperature
Optional : Core probe 30°C - 130°C
4517 BS ACSeries specs V3 24/6/05 10:52 AM Page 20
TECHNICAL SPECIFICATION SHEET FOR
BLUE SEAL GAS COMBI STEAMER
AC SERIES G40AC DD 40 x 1/1GN or 20 x 2/1
Dimensions
Width 1290mm
Depth 895mm
Height 1950mm
(with flue extension) 2323mm
Weight 450kg
Packed Dimensions
Width 1420mm
Depth 1220mm
Height 2250mm
Weight 560kg
Installation clearances
- rear 25mm
- right 500mm*
- left 50mm
*Clearance required on fixed
installations for service
accessibility.
If heat sources are located near
the RH side of the AC combi,
ensure that a minimum distance
of 400mm is maintained.
Install in accordance with local
body regulations only on horizontal
surfaces and not against
Shelves
1/1 GN 40
2/1 GN 20
Shelf Spacings 67mm
Installation requirements
(for precise installation
instructions, please refer to the
unit’s installation manual).
combustible walls.
Water connection requirements
- Cold water
- Flow pressure (2 to 6 bar)
- soft water connection*
- shut-off valve with return flow
inhibitor and dirt filter
- water supply R3/4
- R50 waste water connection
Power connection requirements
Multi pole circuit breaker and all
pole disconnection isolator switch
(*Water softener may be required.
Please refer to installation manual
for water treatment values.)
installed near the appliance.
Supply line voltage;
230-240V ~ 50Hz, 1P+N+E
Gas connection for Natural or
LPG R3/4.
Gas Connection
Nominal Gas Consumption
(kW) 54
(MJ/hr) 194
Electrical Connection (kW) 1.8
Rated Current (A) (230V) 7.8
Exhaust connection to ventilation
system with safety switch.
Observe regulations for gas
suppliers.
IPX5 spray-proof and hose proof.
Optional Extras
SC Core temperature probe
KST40 Extra roll-in trolley to suit 40AC DD
KPT40 Plate banqueting trolley to suit 40AC DD
CPT40 Thermal cover for plate banqueting system to suit 40AC DD
A = WATER CONNECTION R3/4
(SOFTENED WATER) refer to installation
manual for water treatment values.
B = WATER CONNECTION R
C = DRAIN CONNECTION Ø50
D = ELECTRICAL CONNECTION ENTRY
E = HIGH/LOW PRESSURE RELIEF VENT
F = OVEN VENT Ø80
G = GAS SUPPLY ENTRY R
H = GAS FLUE OUTLET Ø80
3
/4
3
/4
Australia
www.moffat.com.au
New Zealand
www.moffat.co.nz
Australia
Moffat Pty Limited
Victoria/Tasmania
740 Springvale Road
Mulgrave, Victoria 3170
Telephone 03-9518 3888
Facsimile 03-9518 3833
vsales@moffat.com.au
New South Wales
Telephone 02-8833 4111
nswsales@moffat.com.au
South Australia
Telephone 03-9518 3888
vsales@moffat.com.au
Queensland
Telephone 07-3630 8600
qldsales@moffat.com.au
Western Australia
Telephone 08-9562 0263
jberent@moffat.com.au
New Zealand
Moffat Limited
Christchurch
Telephone 03-389 1007
sales@moffat.co.nz
Auckland
Telephone 09-574 3150
sales@moffat.co.nz
In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change
specifications and design without notice.
Printed in China
© Copyright Moffat Ltd
Moffat/4517-G40/BH/3.5M/6.05