Moffat AL8 User Manual

Warewashers

Technical data sheet for

AL8

Passthrough Warewasher

W 895mm x D 820mm x H 1755mm

W Series

AL8

AL8 is a versatile utility warewasher suitable for crates, bins and most 80 litre bowls. This unit is usually installed into benches for easy pass-through operation with no lifting required.

Standard Features

• Upper and lower stainless steel arms

with removable end caps for cleaning

• Auto start on door closure

• FastClean - rounded wash tank,

double ﬁltration, scrap and pump inlet ﬁlters

• Flush front design

• Large internal chamber

• Robust stainless steel construction

• Electromechanical controls

• Watermark Certiﬁed

• 2.6 litres per cycle water consumption

• 1.5kW wash pump recirculates wash

water at nominal 800 litres per minute

• 10kW rinse and 5kW wash heating

• Triple cycle selection – 2, 4, and

6 minute cycles

• Powerful rinse booster elements ensure

fast recovery between cycles

• 650mm high wash chamber clearance

• Full access to wash chamber via 3 sided door

• Counter-sprung easy action door lift

• 220mm stainless steel legs for access

beneath machines

• Suits 500mm international racks

• Fits 750mm depth bench for in-line operation

Accessories

• 1 x 500mm Dish Rack

• 1 x 500mm Cup Rack

• 1 x 8 Division Cutlery Container

• 1 x 435mm Cup Cover

Optional Accessories

• Customised loading racks for other items

The unit shall be a Washtech pass-through warewasher with Watermark Certiﬁcation. The unit shall have automatic ﬁll and low level wash pump and element protection and start automatically on door closure. It shall be ﬁtted with operator selectable 2, 4 and 6 minute complete operating cycles. The usable internal wash chamber shall be 650mm high by 540mm deep by 700mm wide. The unit shall be ﬁtted with rotating upper and lower all stainless steel wash and rinse arms all with removable end plugs for cleaning. The unit shall be ﬁtted with a 1.5kW wash pump and hot water consumption shall be 2.6 litres per operating cycle. The unit shall require 15amp 3 phase 5 wire electrical supply. The unit shall be supplied with 500mm cup and dishracks and shipped in 100% recyclable packaging. Height of machine shown includes height with maximum 60mm adjustable leg option in use.

Warewashers

W Series

AL8

Australia

www.moat.com.au

New Zealand

www.moat.co.nz

Australia Moat Pty Limited

Victoria/Tasmania 740 Springvale Road Mulgrave, Victoria 3170 Telephone 03-9518 3888 Facsimile 03-9518 3833 vsales@moat.com.au www.moat.com.au

New South Wales Telephone 02-8833 4111 nswsales@moat.com.au

South Australia Telephone 03-9518 3888 vsales@moat.com.au

Queensland Telephone 07-3630 8600 qldsales@moat.com.au

Western Australia Telephone 08-9202 6820 bgarcia@moat.com.au

New Zealand Moat Limited Christchurch 16 Osborne Street Christchurch 8011 Telephone +64 3-389 1007 Facsimile +64 3-389 1276 Auckland Telephone +64 9-574 3150 export@moat.co.nz www.moat.co.nz

Hot Water

Waste

Electrical

Dimensions

Width Depth Height Weight

temperature connection pressure ﬂow quality

connection line

3 phase N+E 415V 50Hz

Refer operator manual for complete installation instructions.

895mm 820mm 1755mm 150kg

65C 3/4” 200-350 kPa 20l/min potable & soft

1.5 BSP 2” BSP

16.5kW, 25A/phase

Packed Dimensions

Width Depth Height Weight Cubicmetres

1000mm 910mm 1650mm 176kg

1.50m