Moen YB9899BN Specs

Glass Shelf with Pivoting Rail is

constructed of zinc posts and rail.
Shelf is tempered glass.

 YB9899CH – Glass Shelf with

Pivoting Rail

Chrome Finish

 YB9899BN – Glass Shelf with

Pivoting Rail

Brushed Nickel Finish

 YB9899WR – Glass Shelf with

Pivoting Rail

Wrought Iron Finish

 YB9899NL – Glass Shelf with

Pivoting Rail

Nickel Finish

 YB9899ORB – Glass Shelf

with Pivoting Rail

Oil Rubbed Bronze Finish

Cleaning Instructions:

25300 AL MOEN DR IVE  NOR TH OLMSTED, OH 44070
COR POR ATE HEAD QU ARTERS: (800) 321 -8809  F AX: [phone]
IN TERN ATI ONAL: [phone]  FAX: [phone]
CU STOMER SER VI CE (USA): 800-882-0116  FAX: [phone]
WW W.MOEN. COM

Copyright Creative Specialties International Literature #BA1190

1. Position the mounting template on the wall in the desired location. Using a

level, align the template and tape it to the wall.

2. Remove each mounting post from the body by loosening the setscrew.

3. Place each mounting post on the template with notch facing down.

4. One at a time, place each anchor screw through the mounting post, centered

in the hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall.

5. Only insert screw ½ to ¾ into wall.

6. After all screws are installed, tear the template away from the wall.

7. Tighten all 4 screws. Do not over tighten.

8. Place skirt over each mounting post.

9. Assemble glass to each post by removing the pivoting rail. Loosen both

setscrews below rail with the provided hex wrench. Re-assemble with glass
shelf between both washers and finish by screwing the pivoting rail back

Stock Number:___________Glass Shelf w/ Pivoting Rail
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Glass Shelf w/ Pivoting Rail

YB9899

Waterhill® Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.