Moen YB9899 User Manual

Glass Shelf with Pivoting Rail

is

YB98

99CH – Glass Shelf with

Cleaning Instructions:



1. Position the mounting te

mplate on the wall in the desired location. Using a

Stock Number:

___________

Glass Shelf

w/ Pivoting Rail

Materials:

Installation Instructions:

Dimensions:

Waterhill™ Technical Specification
Glass Shelf w/ Pivoting Rail

Stock Numbers:

q

Pivoting Rail

Chrome Finish

q YB9899BN – Glass Shelf with

Pivoting Rail

Brushed Nickel Finish

q YB9899WR – Glass Shelf with

Pivoting Rail

Wrought Iron Finish

YB9899

constructed of zinc posts and rail.
Shelf is tempered glass.

level, align the template and tape it to the wall.

2. Remove each mounting post from the body by loosening the setscrew.

3. Place each mounting post on the template with notch facing down.

4. One at a time, place each anchor screw through the mounting post, centered

in the hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall.

5. Only insert screw ½ to ¾ into wall.

6. After all screws are installed, tear the template away from the wall.

7. Tighten all 4 screws. Do not over tighten.

8. Place skirt over each mounting post.

9. Assemble glass to each post by removing the pivoting rail. Loosen both

setscrews below rail with the provided hex wrench. Re-assemble with glass
shelf between both washers and finish by screwing the pivoting rail back

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

By Creative Specialties

25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: [phone] • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882- 0116 • FAX: [phone]

Copyright Creative Specialties International 2004 Literature #BA1190