25300 AL MOEN D RI VE NOR TH OLMSTED, OH 44070
COR PORATE H EADQU ARTERS: (800) 321-8809 F AX: (800) 848-6636
IN TER NATION AL: (440) 962-2000 FAX: (440) 962-2726
CU STOMER SERVI CE (USA): 800 -882-0116 FAX: (888) 379-2720
WW W. MOEN .C OM
Copyright Creative Specialties International Literature #BA1187
Towel Bars posts are constructed of
zinc. Bar is aluminum.
YB9818CH – 18” Towe l Bar
Chrome Finish
YB9824CH – 24” Tow el Bar
Chrome Finish
YB9818BN – 18” Towe l Bar
Brushed Nickel Finish
YB9824BN – 24” Tow el Bar
Brushed Nickel Finish
YB9818WR – 18” Towel Bar
Wrought Iron Finish
YB9824WR – 24” Towel Bar
Wrought Iron Finish
YB9818NL – 18” Tow el Bar
Nickel Finish
YB9824NL – 24” Tow el Bar
Nickel Finish
YB9818ORB – 18” Tow el Bar
Oil Rubbed Bronze Finish
YB9824ORB – 24” Tow el Bar
Oil Rubbed Bronze Finish
1. Position the mounting template on the wall in the desired location. Using a
level, align the template and tape it to the wall.
2. Remove each mounting post from the body by loosening the setscrew.
3. Place each mounting post on the template with notch facing down.
4. One at a time, place each anchor screw through the mounting post, centered
in the hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall.
5. Only insert screw ½ to ¾ into wall.
6. After all screws are installed, tear the template away from the wall.
7. Tighten all 4 screws. Do not over tighten.
8. Place skirt over each mounting post.Towel Bars
9. Assemble the Towel bar and posts.
10. While assembled, Position each end post with the setscrew down and place
over mounting post. Tighten the setscrew at the bottom of each base.
Stock Number:______________________Towel Bar
By Creative Specialties
Installation Instructions:
Waterhill® Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.