Moen YB9822CH Specs

Double Towel Bar posts are constructed

of zinc. Bars are aluminum.

 YB9822CH – Double Towel Bar

Chrome Finish

 YB9822BN – Double Towel Bar

Brushed Nickel Finish

 YB9822WR – Double Towel Bar

Wrought Iron Finish

 YB9822NL – Double Towel Bar

Nickel Finish

 YB9822ORB – Double Towel

Bar

Oil Rubbed Bronze Finish

Cleaning Instructions:

25300 AL MOEN DRIVE  NORTH OLMSTED, OH 44070
COR PORATE HEAD QUARTER S: [phone]  F AX: [phone]
IN TER NATION AL: [phone]  F AX: [phone]
CU STOMER SER VICE (USA): 800 -882-0116  FAX: [phone]
WW W. MOEN .C OM

Copyright Creative Specialties International Literature #BA1188

1. Position the mounting template on the wall in the desired location. Using a

level, align the template and tape it to the wall.

2. Remove each mounting post from the body by loosening the setscrew.

3. Place each mounting post on the template with notch facing down.

4. One at a time, place each anchor screw through the mounting post, centered

in the hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall.

5. Only insert screw ½ to ¾ into wall.

6. After all screws are installed, tear the template away from the wall.

7. Tighten all 4 screws. Do not over tighten.

8. Place skirt over each mounting post.

9. Assemble the Towel bar and posts.

10. While assembled, Position each end post with the setscrew down and place

over mounting post. Tighten the setscrew at the bottom of each base.

Stock Number:__________________Double Towel Bar
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Double Towel Bar

YB9822

Waterhill® Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.