Moen YB9803BN Specs

Robe Hook is constructed of zinc.

 YB9803CH – Robe Hook

Chrome Finish

 YB9803BN – Robe Hook

Brushed Nickel Finish

 YB9803WR – Robe Hook

Wrought Iron Finish

 YB9803NL – Robe Hook

Nickel Finish

 YB9803ORB – Robe Hook

Oil Rubbed Bronze Finish

Cleaning Instructions:

25300 AL MOEN DR IVE  NOR TH OLMSTED, OH 44070
COR POR ATE HEADQU ARTERS: (800) 321 -8809  F AX: [phone]
IN TERN ATI ON AL: [phone]  FAX: [phone]
CU STOMER SERVI CE (USA): 800-882-0116  FAX: [phone]
WW W.MOEN. COM

Copyright Creative Specialties International Literature #BA1185

1. Remove the mounting bracket from the body by loosening the setscrew.

2. Position the assembled unit on the wall where desired.

3. Lightly mark the outline of each base.

4. Center a mounting bracket within the base outline with “UP” facing you.

5. One at a time, place each anchor screw through the mounting plate, centered

in each large hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall. Do not over
tighten.

6. Place the post with the setscrew down, over mounting bracket. Tighten the

setscrew at the bottom of the base.

Stock Number:______________________Robe Hook
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Robe Hook

YB9803

Waterhill® Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.