Installation Instructions:
Savvy™ Technical Specification
Stock Numbers:
q
Chrome Finish
q YB9590BN – Glass Shelf
Brushed Nickel Finish
q YB9590BB – Glass Shelf
Brushed Bronze Finish
and towel bar and tempered glass
shelf.
1. Position the mounting template on the wall in the desired location.
Using a level, align the template and tape it to the wall.
2. Remove each mounting post from the body by loosening the
setscrew.
3. Place each mounting post on the template with notch facing down.
4. Drill 1/4" holes at the center of each oval marked location.
5. Remove the template from the wall and insert the wall anchors
(provided) into each drilled hole.
6. Place the mounting plate on the wall over the installed wall anchors.
Insert screws through the mounting plate into the anchors.
7. Tighten the screws.
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
By Creative Specialties
25300 AL MOEN DRIVE •NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809 • FAX: (800) 848-6636
INTERNATIONAL: (440) 962-2000 • FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: (888) 379-2720
WWW.SHOWHOUSE.MOEN.COM
Copyright Creative Specialties International 2006 Literature #BA1381