Moen YB9222, YB9222BN, YB9222CH User Manual

base.



Double Towel bar

posts are constructed

YB9222BN

–

24” Double Towel Bar

Cleaning Instructions:

Stock Number:

__________________Double Towel Bar

Materials:

Installation Instructions:

Dimensions:

Double Towel Bar

YB

9222

Fina™ Technical Specification

Stock Numbers:

q

Brushed Nickel Finish

q YB9222CH – 24” Double Towel Bar

Chrome Finish

of zinc. Bars are constructed of
aluminum.

1. Position the mounting template on the wall in the desired location.
Using a level, align the template and tape it to the wall.

2. Remove each mounting post from the body by loosening the setscrew.

3. Place each mounting post on the template with notch facing down.

4. Mark the 2 large hole locations of each mounting bracket.

5. Attach each mounting bracket to the wall, using the wall anchors
provided

6. Mount each base on the corresponding mounting bracket. Check and
make sure that the base set screw hole(s) are facing down. Assemble
a set screw to each base. Use the allen wrench included in hardware
kit to tighten each set screw and secure the assembly to the mounting
bracket(s).

7. Tighten all 4 screws. Do not over tighten.

8. Assemble the Towel bar and posts.

9. While assembled, Position each end post with the setscrew down and
place over mounting post. Tighten the setscrew at the bottom of each

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

By CSI Bath Furnishings

25300 AL MOEN DRIVE •NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: [phone] • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.CSI.MOEN.COM

Copyright Creative Specialties International Literature #BA1454