Moen YB8403ORB Installation manual

1. Remove the mounting bracket from the body by loosening the setscrew.

2. Position the assembled unit on the wall where desired.

3. Lightly mark the outline of each base.

4. Center a mounting bracket within each base outline with “UP” facing
you.

5. Mark the 2 large hole locations of each mounting bracket.

6. Attach each mounting bracket to the wall, using the wall anchors
provided

7. Mount each base on the corresponding mounting bracket. Check and
make sure that the base set screw hole(s) are facing down. Assemble a
set screw to each base. Use the allen wrench included in hardware kit
to tighten each set screw and secure the assembly to the mounting
bracket(s).

25300 AL MOEN D R IVE  N ORTH OLMSTED , OH 44070
CORPORATE H EAD QUARTER S: (800) 321 -8809  FAX: [phone]
INTERNATI ONAL: (440) 962 -2000  FAX: [phone]
CUSTOMER SER VICE (USA): 800 -882-0116  FAX: [phone]
WWW.MOEN.COM

Copyright Creative Specialties International Literature #BA1537

Robe Hook is constructed of zinc.

 YB8403BN – Robe Hook

Brushed Nickel Finish

 YB8403CH – Robe Hook

Chrome Finish

 YB8403ORB – Robe Hook

Oil Rubbed Bronze Finish

 YB8403NL – Robe Hook

Polished Nickel Finish

Cleaning Instructions:

Stock Number:______________________Robe Hook

By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Robe Hook

YB8403

Weymouth® Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.