25300 AL MOEN D RI VE NOR TH OLMSTED , OH 44070
COR PORATE H EADQU ARTERS: (800) 321-8809 F AX: (800) 848-6636
IN TER NATION AL: (440) 962-2000 FAX: (440) 962-2726
CU STOMER SERVI CE (USA): 800 -882-0116 FAX: (888) 379-2720
WW W. MOEN .C OM
Copyright Creative Specialties International Literature #BA1439
Glass Shelf posts are constructed of
zinc. Shelf is tempered glass.
YB8290AZ – Glass Shelf
Antique Bronze Finish
YB8290BN – Glass Shelf
Brushed Nickel Finish
YB8290CH – Glass Shelf
Chrome Finish
YB8290ORB – Glass Shelf
Oil Rubbed Bronze Finish
1. Position the mounting template on the wall in the desired location.
Using a level, align the template and tape it to the wall.
2. Remove each mounting post from the body by loosening the setscrew.
3. Place each mounting post on the template with notch facing down.
4. Mark the 2 large hole locations of each mounting bracket.
5. Attach each mounting bracket to the wall, using the wall anchors
provided
6. Mount each base on the corresponding mounting bracket. Check and
make sure that the base set screw hole(s) are facing down. Assemble
a set screw to each base. Use the allen wrench included in hardware
kit to tighten each set screw and secure the assembly to the mounting
bracket(s).
7. Tighten all 4 screws. Do not over tighten.
8. Assemble glass to each post with glass shelf between both washers
and finished cap.
9. Place each post over the mounting plate with setscrew down. Tighten
both setscrews.
Stock Number:______________________Glass Shelf
By Creative Specialties
Installation Instructions:
Rothbury™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.