Moen YB8286ORB Installation manual

1. Remove the mounting bracket from the body by loosening the setscrew.

2. Position the assembled unit on the wall where desired.

3. Lightly mark the outline of each base.

4. Center a mounting bracket within each base outline with “UP” facing
you.

5. Mark the two large hole locations of each mounting bracket.

6. Attach each mounting bracket to the wall, using the wall anchors
provided.

7. Mount each base on the corresponding mounting bracket. Check and
make sure that the base set screw hole(s) are facing down. Assemble a
set screw to each base. Use the allen wrench included in the hardware
kit to tighten each set screw and secure the assembly to the mounting
brackets(s).

25300 AL MOEN D R IVE  N ORTH OLMSTED , OH 44070
CORPORATE H EAD QUARTER S: (800) 321 -8809  FAX: [phone]
INTERNATI ONAL: (440) 962 -2000  FAX: [phone]
CUSTOMER SER VICE (USA): 800 -882-0116  FAX: [phone]
WWW.MOEN.COM

Copyright Creative Specialties International Literature #BA1438

Towel Ring base is constructed of
zinc. Ring is aluminum.

 YB8286AZ – Towel Ring

Antique Bronze Finish

 YB8286BN – Towel Ring

Brushed Nickel Finish

 YB8286CH – Towel Ring

Chrome Finish

 YB8286ORB – Towel Ring

Oil Rubbed Bronze Finish

Cleaning Instructions:

Stock Number:______________________Towel Ring

By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Towel Ring

YB8286

Rothbury™ Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.