Moen YB8208BN Installation manual

25300 AL MOEN DRIVE  N ORTH OLMSTED, OH 44070
COR PORATE HEAD QUAR TER S: [phone]  F AX: [phone]
IN TERNATI ONAL: [phone]  FAX: [phone]
CU STOMER SER VIC E (U SA): 800-882-0116  FAX: [phone]
WW W.MOEN. COM

Copyright Creative Specialties International Literature #BA1435

Paper Holder is constructed of zinc.

 YB8208AZ – Pivoting Paper Holder

Antique Bronze Finish

 YB8208BN – Pivoting Paper Holder

Brushed Nickel Finish

 YB8208CH – Pivoting Paper Holder

Chrome Finish

 YB8208ORB – Pivoting Paper Holder

Oil Rubbed Bronze Finish

Cleaning Instructions:

1. Position the mounting template on the wall in the desired location.
Using a level, align the template and tape it to the wall.

2. Remove each mounting post from the body by loosening the setscrew.

3. Place each mounting post on the template with notch facing down.

4. Mark the 2 large hole locations of each mounting bracket.

5. Attach each mounting bracket to the wall, using the wall anchors
provided

6. Mount each base on the corresponding mounting bracket. Check and
make sure that the base set screw hole(s) are facing down. Assemble
a set screw to each base. Use the allen wrench included in hardware
kit to tighten each set screw and secure the assembly to the mounting
bracket(s).

7. Tighten all 4 screws. Do not over tighten.

8. Place each post over the mounting plate (setscrew down). Pivoting
post with bar to be on left side. Tighten both setscrews.

Stock Number:______________________Paper Holder
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Paper Holder

YB8208

Rothbury™ Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.