Moen YB5422BN Specs

25300 AL MOEN D RI VE  NOR TH OLMSTED , OH 44070
COR PORATE H EADQU ARTERS: [phone]  F AX: [phone]
IN TER NATION AL: [phone]  FAX: [phone]
CU STOMER SERVI CE (USA): 800 -882-0116  FAX: [phone]
WW W. MOEN .C OM

Copyright Creative Specialties International

Towel Bar posts are constructed of
zinc. Bar is aluminum.

 YB5422AN – 24” Towel Bar

Antique Nickel Finish

 YB5422AZ – 24” Towel Bar

Antique Bronze

 YB5422BN – 24” Towel Bar

Brushed Nickel Finish

 YB5422CH – 24” Towel Bar

Chrome Finish

 YB5422ORB – 24” Towel Bar

Oil Rubbed Bronze Finish

 YB5422PB – 24” Towel Bar

Polished Brass Finish

 YB5422WR – 24” Towel Bar

Wrought Iron Finish

Cleaning Instructions:

Stock Number:______________________Double Towel Bar

By Creative Specialties

Materials:

Stock Numbers:

Dimensions:

Double Towel Bar

YB5422

Kingsley® Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

Literature #BA1482

Directions below are for installation into drywall. If installing product into
a stud, use the wood screws only.

1. Remove mounting posts from the product assemblies by loosening
each setscrew.

2. Position the mounting template on the wall in the desired location

3. Using a level, align the template and tape it to the wall.

4. Drill two 5/16” holes at each mounting post location that corresponds
to your product.

5. We recommend using the horizontal holes for drywall installation.

6. Remove the template from the wall.

7. Fold ends of the plastic toggle anchor together and insert into each
hole in the wall.

8. Lightly tap anchors until flush with the wall.

9. One at a time, insert plastic pin into each anchor and lightly tap to
activate anchor.

10. Remove pin and repeat on all anchors.

11. One at a time, place each mounting post over anchors (notch facing
downward) and insert screws through post into anchors.

12. Tighten screws.

Installation Instructions: