Moen YB5403WR Specs

25300 AL MOEN D RI VE  NOR TH OLMSTED , OH 44070
COR PORATE H EADQU ARTERS: [phone]  F AX: [phone]
IN TER NATION AL: [phone]  FAX: [phone]
CU STOMER SERVI CE (USA): 800 -882-0116  FAX: [phone]
WW W. MOEN .C OM

Copyright Creative Specialties International

Robe Hook is constructed of zinc.

 YB5403AN – Robe Hook

Antique Nickel Finish

 YB5403AZ – Robe Hook

Antique Bronze Finish

 YB5403BN – Robe Hook

Brushed Nickel Finish

 YB5403CH – Robe Hook

Chrome Finish

 YB5403ORB – Robe Hook

Oil Rubbed Bronze Finish

 YB5403PB – Robe Hook

Polished Brass Finish

 YB5403WR – Robe Hook

Wrought Iron Finish

Cleaning Instructions:

1. Remove the mounting post from the body by loosening the setscrew.

2. Position the mounting post on the wall at desired location. Large slots

to be right and left. Small holes to be top and bottom.

3. One at a time, place each anchor screw through the mounting post,

centered in the large slot hole. Using a Phillips screwdriver, turn the
anchor screw while applying pressure. Screw will self drill and tap
into drywall. Do not over tighten.

4. Place assembly over the mounting post, setscrew facing down.

5. Tighten setscrew.

Stock Number:______________________Robe Hook
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Robe Hook

YB5403

Kingsley® Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

Literature #BA1117