Moen YB5170BN Specs

Wall Mounted Hair Dryer Holder is

constructed of zinc post and stainless
steel ring.

 YB5170BN – Hair Dryer Holder

Brushed Nickel Finish

 YB5170CH – Hair Dryer Holder

Chrome Finish

 YB5170ORB – Hair Dryer

Holder

Oil Rubbed Bronze Finish

Cleaning Instructions:

25300 AL MOEN DRIVE  NOR TH OLMSTED , OH 44070
CORPORATE HEAD QUARTERS: [phone]  FAX: [phone]
INTERNATIONAL: [phone]  FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116  FAX: [phone]
WWW.MOEN.COM

Copyright Creative Specialties International Literature #BA1622

1. Remove the mounting bracket from the body by loosening the

setscrew.

2. Position the assembled unit on the wall where desired.

3. Lightly mark the outline of the base.

4. Center a mounting bracket within the base outline with “UP” facing

you.

5. Attach the mounting bracket to the wall, using the wall anchors

provided.

6. Mount the base on the corresponding mounting bracket. Check and

make sure that the base set screw hole is facing down. Assemble a
set screw to the base. Use the allen wrench included in the hardware
kit to tighten the set screw and secure the assembly to the mounting
bracket.

Stock Number:___________________H air Dryer Holder
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Wall Mounted Hair Dryer Holder

YB5170

Voss™ Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.