Moen YB5118ORB Specs

Towel Bar Posts are constructed of

zinc and towel bar is constructed of
stainless steel.

 YB5118BN – 18” Towel Bar

Brushed Nickel Finish

 YB5118CH – 18” Towel Bar

Chrome Finish

 YB5118ORB – 18” Towel Bar

Oil Rubbed Bronze Finish

Cleaning Instructions:

25300 AL MOEN DRIVE  NORTH OLMSTED, OH 44070
COR POR ATE HEAD QUAR TERS: [phone]  FAX: [phone]
IN TERN ATI ON AL: [phone]  FAX: [phone]
CU STOMER SER VI CE (USA): 800 -882-0116  F AX: [phone]
WW W.MOEN .COM

Copyright Creative Specialties International Literature #BA1620

1. Position the mounting template on the wall in the desired location.

Using a level, align the template and tape it to the wall.

2. Remove each mounting post from the body by loosening the

setscrew.

3. Place each mounting post on the template with notch facing down.

4. Mark the 2 large hole locations of each mounting bracket.

5. Attach each mounting bracket to the wall, using the wall anchors

provided.

6. Mount each base on the corresponding mounting bracket. Check and

make sure that the base set screw hole(s) are facing down.
Assemble a set screw to each base. Use the allen wrench included
in hardware kit to tighten each set screw and secure the assembly to
the mounting bracket(s).

7. Tighten all 4 screws. Do not over tighten.

8. Place each post over the mounting plate (setscrew down). Pivoting

post with bar to be on left side. Tighten both setscrews.

Stock Number:______________________18” Towel Bar
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

18” Towel Bar

YB5118

Voss™ Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.