Moen YB5108ORB Specs

Paper Holder is constructed of zinc.

 YB5108BN – Pivoting Paper

Holder

Brushed Nickel Finish

 YB5108CH – Pivoting Paper

Holder

Chrome Finish

 YB5108ORB – Pivoting Paper

Holder

Oil Rubbed Bronze Finish

Cleaning Instructions:

25300 AL MOEN D RIVE  NOR TH OLMSTED, OH 44070
CORPOR ATE H EADQUAR TERS: (800) 321 -8809  FAX: [phone]
IN TERN ATION AL: (440) 962 -2000  F AX: [phone]
CU STOMER SERVI CE (U SA): 800-882-0116  FAX: [phone]
WW W.MOEN.C OM

Copyright Creative Specialties International Literature #BA1704

1. Position the mounting template on the wall in the desired location.

Using a level, align the template and tape it to the wall.

2. Remove each mounting post from the body by loosening the set

screw.

3. Place each mounting post on the template with notch facing down.

4. Mark the 2 large hole locations of each mounting bracket.

5. Attach each mounting bracket to the wall, using the wall anchors

provided.

6. Mount each base on the corresponding mounting bracket. Check and

make sure that the base set screw hole(s) are facing down.
Assemble a set screw to each base. Use the allen wrench included
in hardware kit to tighten each set screw and secure the assembly to
the mounting bracket(s).

7. Tighten all 4 screws. Do not over tighten.

8. Place each post over the mounting plate (set screw down). Pivoting

post with bar to be on left side. Tighten both set screws.

Stock Number:______________________Paper Holder
By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Pivoting Paper Holder

YB5108

Voss™ Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.