Moen YB0892BN Specs

25300 AL MO EN DRIVE  NORTH OLMS T E D , O H 44070
CORPORATE HEA D Q U A R T E R S : [phone]  FAX: [phone]
INTERNATIONA L: [phone]  FAX: [phone]
CUSTOMER SERV ICE (USA): 800-882-0116  FAX: [phone]
WWW.MOEN.COM

Copyright Creative Specialties International Literature #BA1721

Mirror base, arms and ring are
constructed of zinc.

 YB0892BN – Magnifying Mirror

Brushed Nickel Finish

 YB0892CH – Magnifying Mirror

Chrome Finish

Cleaning Instructions:

Stock Number:___________________Magnifying Mirror

By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Magnifying Mirror

YB0892

ArrisTM Technical Specification

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

1. Remove the mounting plate from the body by loosening the setscrew.

2. Position the mounting plate on the wall in the desired location and
mark holes.

3. Drill ½” pilot holes in marked locations.

4. Unthread mounting screws from two toggle anchors and thread
through mounting plate holes. CAUTION: Be sure the toggle anchors
are partially threaded onto the screws and positioned so the toggle
collapses when pushed through the predrilled pilot holes. While
holding mounting plate (with screws and toggles installed), push both
toggle anchors through predrilled pilot holes.

5. Tighten both screws until tight.

6. Place mirror assembly over the mounting plate with setscrew down.

Tighten setscrew.