Moen TS6520BN Specs
Lift
Rod
1-11/32"
(34mm)
QUICK CONNECT
HOSE ASSEMBLY
2-1/4" (57mm)
esct. dia.
8"
(204mm)
3"
(76mm)
4-3/16"
(107mm)
9"
(229mm)
5-13/16"
(148mm)
5-1/8
(130mm)
5-1/4"
(134mm)
1” (57mm) MAX.
DECK THICKNESS
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
ICC A117.1and all applicable requirements referenced therein
• Contains no more than 0.25% weighted average lead content
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with the
Federal Safe Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Specifications
ICON™
Two Handle Widespread
Lavatory Faucet
Models: TS6520 series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1-1/8" MIN. DIA.
NOTE: FOR DECK THICKNESS 1-1/2" to 3", USE SERVICE KIT
#115001. VALVES INSTALL THROUGH 1-1/4" DIA. HOLE.
Rev. 6/13
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Loading...