Moen T6906 Specs
DESCRIPTION
2-3/4"
(70mm)
2-5/8 " Spout Base
(67mm)
2-1/8" Handle Base
(54mm)
3-1/2"
(89mm)
7-3/8"
(187mm)
3” (76mm) MIN.
MAX WALL THICKNESS
1-3/4” (45mm)
• Metal construction with various finishes identified by suffix
• Designed to be installed through 2, 1-1/4" and 1, 1" min. dia holes
8" on center
• 1/2" copper connections
• Adaptable for non-8" centers
OPERATION
• Maximum handle rotation angle is 90˚ to full on for either handle
• Rotate hot side counterclockwise to open and clockwise to close
• Rotate cold side clockwise to open and counterclockwise to close
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design nonmetallic/nonferrous and
stainless steel material
STANDARDS
When trim kit is added to M-Pact valve, the product is:
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
S p e c i f i c a t i o n s
VOSS™
Two-Handle Wall Mount Faucet
Models: T6906 series
Valve: 9700
4/12
M•pact™ System
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Loading...