Moen T6530 User Manual

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

Specifications

DESCRIPTION

• Metal construction with various finishes identified by suffix

• 1/2" copper connections

• Designed to be installed through 2, 1-1/4" and 1, 1" min. dia.

holes, 8" on center

• Adaptable for non-8" centers OPERATION

• Maximum handle rotation angle is 90˚ to full on for either handle

• Rotate hot side counterclockwise to open and clockwise to close

• Rotate cold side clockwise to open and counterclockwise to close Flow

• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,

for products made before October 2008 flow is limited to

2.2 gpm max (8.3 L/min)

CARTRIDGE

• 1224 cartridge design nonmetallic/nonferrous and stainless steel

material

STANDARDS When trim kit is added to M-Pact valve, the product is:

• Third party certified to WaterSense,® ASME A112.18.1, ICC A117.1

and all applicable requirements referenced therein

• Certified to ANSI/NSF 61/9

• Complies with California Proposition 65 and with the

Federal Safe Water Drinking Act

•ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser

• 5 year warranty if used in commercial installations

Icon™

Two-Handle Wall Mount Faucet

Models: T6530 series

Rev. 7/08

M•Pact™ System

(8mm)

Escutcheon Dia.

2-1/4" (8mm)

4-3/16"

(11mm)

1-7/8"

(48mm)

25˚

7-1/2"

(19mm)

MAX WALL THICKNESS

1-3/4” (45mm)