Moen T2153, T62153, T62156 User Manual

Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 2/09
THIN WALL APPLICATION
THICK
WALL APPLICATION
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
BRANTFORD™ POSI-TEMP
®
Single-Handle Tub/Shower (Trim Only)
Models: T2153 series
T62153 (Bulk pack 12 per carton)
T62156 (Bulk pack less showerhead)
FAUCET DESCRIPTION
Metal construction with various finishes identified by suffix
Includes showerhead, arm, flange and diverter spout
OPERATION
Handle operates counterclockwise through a 270˚ arc with off at 6 o’clock and maximum hot at the 9 o’clock position. Shut off in clockwise direction
Adjustable temperature limit stop to control maximum hot water temperature
Pressure balancing mechanism maintains selected discharge temperature to ± 3°
FLOW
Showerhead limited to 2.5 gpm max. (9.5 L/min)
CARTRIDGE
1222 cartridge design
Nonmetallic/nonferrous and stainless steel materials
Accommodates back to back installations
STANDARDS
Third party certified to meet CSA B-125.1, ASME A112.18.1, ICC A117.1 and all applicable requirements referenced therein
for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser
5 year warranty if used in commercial installations
MPact™ System
ADA
7" (178 mm)
ESCUTCHEON
DIAMETER
7"
(178 mm)
MIN
3-1/2”
(89mm)
HOT
INLET
3-3/8”
(86mm)
COLD INLET
2" CC (51mm)
1-7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
7-13/16”
(199mm)
3-7/8“ (99mm)
(178mm)
TUB RIM
FACE OF STUD
1/2" MIN. CC (13mm) 5/8" MIN. IPS (16mm)
3-1/2" (89mm) MAX.
6'-6"
2-1/4" (57mm) MIN.
DIAMETER
WAL L
OPENING
FLOOR LINE
2-1/2" MAX. (63mm)
4-1/2" (114mm) WALL OPENING
C
L
1-3/8" (35mm)
45" (1143mm)/
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
7“
FLOOR
TUB SHOWER
(1981mm)
3/16" (typ) (5mm)
PLASTER GROUND
1 1/2"
(38mm)
C
L
1 3/8"
(35mm)
PLASTIC
TUB/SHOWER
SURROUND
Loading...