Moen T6193 Specs

DESCRIPTION

5-9/16"

(140mm)

2-61/64"

(75mm)

5-9/16"

(140mm)

4-13/16"
(122mm)

4-17/64"
(108mm)

10°

2-37/64"

(65mm)

6-13/32"
(163mm)

1-29/32"

(48mm)

1/4"

(6mm)

1-9/16"
(40mm)

2"

(51mm)

• Hydrolock™ quick connect system

• Metal construction with various finishes identified by suffix

• 1/2" IPS connections

OPERATION

• Lever style handles

• Maximum handle rotation angle is 90˚ to full on for either handle

• Hot side counterclockwise to open (clockwise to close)

• Cold side clockwise to open (counterclockwise to close)

• Includes hot and cold temperature indicators

FLOW

• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)

CARTRIDGE

• 1224 cartridge design

• Nonmetallic, nonferrous and stainless steel material

STANDARDS

• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1, and
all applicable requirements referenced therein including NSF61/9

• Certified to ANSI/NSF 61/9

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act

• ADA for lever handles

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser

• 5 year warranty if used in commercial installations

S p e c i f i c a t i o n s

ALIGN™

Two Handle Widespread

Lavatory Faucet Trim

Models: T6193 series

Valve: 9000, 69000

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED

THRU 3 HOLES, 1-1/8" MIN. DIA.

NOTE: FOR DECK THICKNESS 1-1/2" to 3", USE SERVICE KIT

#115001. VALVES INSTALL THROUGH 1-1/4" DIA. HOLE.

Rev. 10/13

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com