CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
THIN WALL APPLICATION
THICK WALL APPLICATION
KINGSLEY™ MOENTROL®
with Built-In 3 Function Transfer Valve Trim
Model: T4111 series
Discontinued Models: T4111CP, T4111P
DESCRIPTION
• Metal construction with various finishes identified by suffix
OPERATION
• Pull-on/push-off operation of temperature and volume,
rotational control of transfer valve
• Temperature operates through an 180˚ arc of handle
travel (full cold to full hot)
• Adjustable temperature limit stop to control maximum
hot water temperature
• 180˚ rotation of transfer valve handle with stops
• Pressure balancing mechanism maintains selected
discharge temperature to ± 2˚
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1
• for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 12/08
ADA
There is more than 1 version of this model.
Page down to identify the version you have.
7" Max
(178mm)
Escutcheon
2" Max Wall
(51mm)
FINISHED WALL LINE
39"
(991mm)
54"
(1372mm)
(1142mm)
44"
3/16"(typ)
(5mm)
C
L
Plaster
Ground
Plastic
Tub/Shower
Surround
Floor
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
THIN WALL APPLICATION
THICK WALL APPLICATION
KINGSLEY™ MOENTROL
®
with Built-In 3 Function Transfer Valve Trim
Model: T4111 series
Discontinued Models: T4111CP, T4111P
DESCRIPTION
• Metal construction with various finishes identified by suffix
OPERATION
• Pull-on/push-off operation of temperature and volume,
rotational control of transfer valve
• Temperature operates through an 180˚ arc of handle
travel (full cold to full hot)
• Adjustable temperature limit stop to control maximum
hot water temperature
• 180˚ rotation of transfer valve handle with stops
• Pressure balancing mechanism maintains selected
discharge temperature to ± 2˚
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 12/08
7" Max
(178mm)
Escutcheon
2" Max Wall
(51mm)
FINISHED WALL LINE
39"
(991mm)
54"
(1372mm)
(1142mm)
44"
3/16"(typ)
(5mm)
Plaster
Ground
Plastic
Tub/Shower
Surround
Floor
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Moenflo®XL Single Function Showerhead
Models: 6302, 6302P, 6302PM, 6302ST,
6302ORB, 6302WR, 6302AN, 6302BN,
6302PW, 6302AZ
Rev. 1/07
DESCRIPTION
• Fixed mount showerhead only
• Nonmetallic spray face and shell
• Brass swivel ball assembly
• Available in Chrome, Lifeshine
®
Polished Brass, Platinum,
Lifeshine
®
Satine™, Oil Rubbed Bronze, Wrought Iron, Antique
Nickel, Lifeshine
®
Brushed Nickel, Pewter or Antique Bronze finish
FLOW
• Designed to deliver 2.5 gpm (9.5 L/min) at 60 psi
STANDARDS
• Designed and manufactured to comply with the
requirements of: ASME A112.18.1/CSA B125.1 and all
requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
1/2" IPS
THREADS
4-3/8"
(111mm)
6" (152mm)
ARM
2-1/2"
(64mm)
3-7/16"
(88mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Small Single Function Body Spray
Models: A501, A501AN, A501AZ, A501BB,
A501BN, A501HN, A501NL, A501ORB, A501P,
A501PM, A501PW, A501ST, A501WR
A501 Series
Rev. 1/08
DESCRIPTION
• Metallic spray face and shell
• Brass swivel ball assembly
• Available in chrome plated, antique nickel, antique bronze,
LifeShine
®
brushed bronze, LifeShine® brushed nickel,
LifeShine
®
hammered nickel, nickel, oil rubbed bronze,
LifeShine
®
polished brass, platinum, pewter or LifeShine
®
satine or wrought iron finishes
OPERATION
• Single spray function
FLOW
• Designed to deliver 1.75 gpm max (6.6 L/min) at 80 psi
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
WARRANTY
• Warranted for one year against material or
manufacturing defects
21˚
2-1/2“
(63mm)
2“
(51mm)
2-1/2“
(63mm)
Loading...