Moen SP2515 User Manual
Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 3/09
THIN WALL APPLICATION
THICK WALL APPLICATION
KINGSLEY™POSI-TEMP
®
Single-Handle Shower Valve Trim
Models: T2111 series
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
OPERATION
• Handle operates counterclockwise through a 270˚ arc with off at 6 o’clock
and maximum hot at the 9 o’clock position. Shut off in clockwise direction
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 2°
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1, ICC A117.1 and
all applicable requirements referenced therein
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
7-1/2"
(191mm)
MIN.
HOT
INLET
7" (178mm)
ESCUTCHEON
DIAMETER
COLD
INLET
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
4-1/2" (114mm)
WALL OPENING
FACE OF STUD
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
2 1/2" MAX. (63mm)
C
L
1 3/8" (35mm)
45" (1143mm)/
48" (1219mm)-SHOWER
FLOOR
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
FLOOR LINE
3/16" (typ) (5mm)
PLASTER GROUND
1 1/2"
(38mm)
C
L
1 3/8"
(35mm)
PLASTIC
TUB/SHOWER
SURROUND
Loading...