Moen TS3716, S936, S956, TS3710, TS3712 User Manual

Valve Sold Separately TS3716sp: Rev. 11/07

Specifications

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

Solace

™

ExactTemp® 3/4" Thermostatic

Tub/Shower Trim

Models: TS3710 series-valve trim only

TS3712 series-shower trim only TS3716 series-tub/shower trim

Valves: S936 - thermostatic

S956 - volume control

WALL OPENING

8" (203mm)

6" (152mm) MIN.

(177mm)

5-1/4"

(133mm)

2-1/4"

(57mm)

(178mm)

5-1/2"

(140mm)

2-1/2"

(64mm)

2-11/16" (68mm)

(178mm)

8" (203mm)

6" (152mm) MIN

5-1/4"

(133.4mm)

WALL OPENING

2-11/16" (68.4mm)

(177.4mm)

2-1/4"

(57mm)

WALL OPENING

(177mm)

DESCRIPTION

• Metal construction with various finishes identified by suffix

• For use with S936 3/4”thermostatic valve and S956 volume control valve with integral checkstops

OPERATION

• Flow lever operates counterclockwise through a 90 degree arc with off at 6 o’clock and maximum flow at the 3 o’clock position. Shut off in clockwise direction

• Temperature lever operates through a 340 degree arc with maximum cold at full clockwise rotation and maximum hot at full counterclockwise rotation

• Safety stop preset temperature at 105˚F ( 41degrees C)

• Safety stop override allows maximum temperature at 120˚F (49˚C)

• Factory established temperature range from 70˚F (21˚C) to 120˚F (49˚C)

FLOW

• Showerhead is limited to 2.5 gpm (9.5 L/min)

CARTRIDGE

• 130156 thermostatic cartridge design with non metallic/nonferrous materials

• 130157 volume ceramic disc cartridge design

STANDARDS

• Third party certified to meet CSA B-125, ASME A112.18.1M and all applicable requirements referenced therein including ASSE1016

• for lever handles

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installation

CRITICAL DIMENSIONS

(DO NOT SCALE)

ADA

SHOWER ONLY APPLICATION

TUB/SHOWER APPLICATION