Moen S72308EC Specs

6-3/16"

(157mm)

17-1/4"

(438mm)

5-5/16"

(135mm)

9-5/8"

(244mm)

2-1/2" Max

Deck Thickness

1-3/16" (30mm)

1-1/8"

(28mm)

3-3/4"

(95mm)

(229mm)

2-1/4"

(57mm)

31-5/8"

(803mm)

2-1/4"

(57mm)

FAUCET DESCRIPTION

• Reflex™ pulldown system offers smooth operation, easy movement and secure docking

• Metal construction with various finishes identified by suffix

• Quick connect installation

• Pulldown spray with 68" braided hose

• Flexible supply lines with 3/8" compression fittings

• High arc spout provides height and reach to fill or clean large pots while pulldown wand provides the maneuverability for cleaning or rinsing

• 360˚ rotating spout

• Faucet designed for handle to be mounted on right side

OPERATION

• Lever style handle

• Temperature controlled by 100˚ arc of handle travel

• Operates with less than 5 lbs. of force

• Operates in stream or spray mode in the pulldown or retracted position

FLOW

• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi

CARTRIDGE

• 1255™ Duralast™ cartridge

STANDARDS

• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1 and all applicable requirements therein including NSF 61/9G

• Meets CalGreen and Georgia SB370 requirements

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act

• The backflow protection system in the device consists of two independently operating check valves, a primary and a secondary which prevent backflow

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

S p e c i f i c a t i o n s

STō

Single Handle High Arc

Pulldown Kitchen Faucet

Models: S72308 series

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED

THRU 1 HOLE, 1-1/2” (38mm) MIN. DIA..

5/13

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com