Moen S6705 Specs
Lift
Rod
2-1/2"
(80mm)
MAX.
6-5/16”
(160mm)
4-3/16”
(106mm)
3-13/16”
(97mm)
7-5/16”
(186mm)
2-3/16”
(56mm)
1-11/16”
(43mm)
23-1/4”
(593mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supply lines with 3/8” compression fittings
• Includes metal pop-up waste assembly
OPERATION
• Lever style handle
• Temperature controlled by 100° arc of handle travel
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1, NSF 61/9
and all applicable requirements referenced therein
• Contains no more than 0.25% weighted average lead content
• Third party certified to comply with WaterSense® High Efficiency
Bathroom Sink Faucet Specification
• Complies with California Proposition 65 and with
the Federal Safe Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
S p e c i f i c a t i o n s
90 DEGREE™
Single-Handle Lavatory Faucet
Model: S6705 series
NOTE: THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 1 HOLE, 1-1/8” MIN. DIA.
4/13
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-465-6130
www.moen.com
Loading...