Moen S6700HC Specs

Lift

Rod

2-1/2"

(80mm)

MAX.

6-5/16”

(160mm)

4-1/4”

(108mm)

3-13/16” (97mm)

7-5/16”

(186mm)

2-3/16”

(56mm)

1-11/16” (43mm)

23-1/4”

(593mm)

There is more than 1 version of this model. Page down to identify the version you have.

DESCRIPTION

• Metal construction with various finishes identified by suffix

• Flexible supply lines with 3/8” compression fittings

• Includes metal pop-up waste assembly OPERATION

• Lever style handle

• Temperature controlled by 100° arc of handle travel FLOW

• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi CARTRIDGE

• 1255™ Duralast™ cartridge for Single-Handle Faucets STANDARDS

• Third party certified to ASME A112.18.1/CSA B125.1, NSF 61/9

and all applicable requirements referenced therein

• Contains no more than 0.25% weighted average lead content

• Third party certified to comply with WaterSense® High Efficiency

Bathroom Sink Faucet Specification

• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and

finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

Specifications

90 DEGREE™

Single-Handle Lavatory Faucet

Model: S6700

NOTE: THIS FAUCET IS DESIGNED TO BE

IN STALLED THRU 1 HOLE, 1-1/8” MIN. DIA.

Rev. 4/12

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-465-6130

www.moen.com