Moen S62608SRS Specs

2-1/2" (63mm)

Max Deck Thickness

27-9/16"

(700mm)

15-1/2"

(373mm)

9-1/2"

(241mm)

2-1/2"

(64mm)

6-1/2"

(165mm)

3-5/8"

(92mm)

1-1/8"

(28mm)

1-1/8"

(28mm)

9-3/4"

(248mm)

5-1/4"

(133mm)

2-11/16"

(68mm)

FAUCET DESCRIPTION

• Reflex™ pulldown system offers smooth operation, easy movement and secure
docking

• Metal construction with various finishes identified by suffix

• Pulldown spray with 68" braided hose and Duralock Quick Connect installation

• Flexible supply lines with 3/8" compression fittings

• High arc spout provides the perfect height and reach for prep sinks while the
pulldown feature provides maneuverability for food preparation tasks

• 360˚ rotating spout

• Faucet designed for handle to be mounted on right side

OPERATION

• Lever style handle

• Temperature controlled by 100˚ arc of handle travel

• Operates with less than 5 lbs. of force

• Operates in stream or spray mode in the pulldown or retracted position

FLOW

• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi

CARTRIDGE

• 1255™ Duralast™ cartridge for Single-Handle Faucets

STANDARDS

• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein including NSF 61/9G

• Meets CalGreen and Georgia SB370 requirements

• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act

• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser

• 5 year warranty if used in commercial installations

S p e c i fi c at i o n s

Single Handle High Arc

Pulldown Prep/Bar Faucet

Models: S62608 series

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED

THRU 1 HOLE, 1-1/2” (38mm) MIN. DIA.

CRITICAL DIMENSIONS

(DO NOT SCALE)

1/14

TO ORDER PARTS CALL: 1-800-BUY-MOEN

www.moen.com