Moen S5510ORB Specs
FACUET DESCRIPTION
• Metal construction with various nishes identied by sux.
• 3/8" compression inlet connection
• Compatible with S5500 Filtering System
OPERATION
• Lever style handle
• Will operate with less than 5 lbs. of force
FLOW
• Flow is limited to 1.5 gpm
CARTRIDGE
• 1234 Duralast™ cartridge
STANDARDS
• Third party certied to ASME A112.18.1/CSA B-125.1 and all applicable
requirements referenced therein including NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• Meets CalGreen and Georgia SB370 requirements
• ADA
for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and nish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Spec i fi ca tions
SIP™
Traditional Beverage Faucet
Models: S5510 Series
NOTE: DESIGNED TO INSTALL THROUGH
1 HOLE, 1" 25MM MIN. DIA.
Rev. 3/14
11"
(279mm)
8-3/4"
(222mm)
3-1/16"
(78mm)
2-1/16"
(52.4mm)
Max Deck Thickness
4-9/16"
(116mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
2-1/2"
(63.5mm)
2-1/16"
(52mm)
www.moen.com
Loading...