Moen S5170 Specs

2-1/2” Max Deck

Thickness

(64mm)

2-1/2”

(64mm)

(91°)

11”

(280mm)

10”

(254mm)

22-3/4”

(579mm)

7-1/4”

(184mm)

2-1/2”

(63mm)

2-1/2”

(63mm)

6-5/16”

(160mm)

4”

(101mm)

5-5/8”

(142mm)

FAUCET DESCRIPTION

• Metal construction with various finishes identified by suffix

• Single hole mounting

• Flexible supply lines with 3/8" compression fittings

• High arc spout provides height and reach to fill or clean large pots

• 360˚ rotating spout provides ability to install handle on either side

OPERATION

• Lever style handle

• Temperature controlled by 100˚ arc of handle travel

FLOW

• Spout flow is limited to 2.0 gpm max (7.6L/min) at 60 psi

CARTRIDGE

• 1255™ Duralast™ cartridge for Single-Handle Faucets

STANDARDS

• Third party certified to ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein including NSF 61/9

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe Water
Drinking Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser

• 5 year warranty if used in commercial installations

S p e c i f i c a t i o n s

90 DEGREE™

Single Handle High Arc

Bar/Prep Faucet

Model: S5170 series

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED

THRU 1 HOLE, 1-1/4” (32mm) MIN. DIA.

Rev. 12/11

CRITICAL DIMENSIONS

(DO NOT SCALE)

TO ORDER PARTS CALL: 1-800-BUY-MOEN

The use of aerator part 116711
reduces flow to a maximum of

1.5 gpm (5.7L/min.)

www.moen.com