Moen S4711 User Manual

CRITIC

AL DIMENSIONS

(DO NOT SCALE)

Specifications

Rev. 6/08

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

DESCRIPTION

- Metal construction with various finishes identified by suffix

- 30" flexible supply lines with 3/8" fittings intended to connect
directly to supply stops

- Includes metal pop-up waste assembly

- Designed to be installed through 1, 1-1/8"min. dia. hole

OPERATION

- Cross handles

- Maximum handle rotation angle is 90˚ to full on for either handle

- Rotate hot side handle counterclockwise to open and clockwise to close

- Rotate cold side handle clockwise to open and counterclockwise to close

FLOW

- Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max. (8.3 L/min)

- Features a laminar flow pattern for dramatic water presentation

CARTRIDGE

- 1224 cartridge design with nonmetallic/nonferrous
and stainless steel materials

STANDARDS

- Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1, ICC A117.1
and all applicable requirements referenced therein

- Certified to ANSI/NSF 61/9

- Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act

WARRANTY

- Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser

- 5 year warranty if used in commercial installations

SOLACE™

Two-Handle Single Mount

Lavatory Faucet

Models: S4711 series

SPOUT BASE

1.969" (50mm)

9-3/4"

(247mm)

10-1/2”

(260mm)

7”

(178mm)

2-1/4” (57mm) MAX.

DECK THICKNESS

6”

(152mm)

Back

Splash

2-1/2” min. (77mm)
for lift rod operation