Moen R4570CG, R4570BP, R4570ST, T4570W, 4570 User Manual
...
Specifications
®
DESCRIPTION
• Metal construction with chrome plated and glacier,
LifeShine
Classic Gold, Satine
®
polished brass, Platinum, Black Opal™,
™
or Nickel finish
• 1/2" IPS connections
• Includes metal pop-up type waste assembly on
4000 series models
• Includes 50/50 pop-up type waste assembly on
80000 series models
OPERATION
• Lever style handles (less handle inserts)
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open
(counterclockwise to close)
• Includes hot (red) and cold (blue) color indicators
FLOW
• Aerator is limited to 2.2 gpm (8.3 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified by CSA and IAPMO to meet
ASME A112.18.1M and all applicable requirements
referenced therein and complies with the applicable
requirements of ANSI A117.1
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with
the Federal Safe Water Drinking Act
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
NOTE: SPOUT INSTALLS THROUGH 1-1/8" MIN.
DIA. HOLE. VALVES INSTALL THROUGH
1-1/8” MIN. DIA. HOLE
ADA
MONTICELLO®INSPIRATIONS
™
Two-Handle Widespread Lavatory Faucet
(Less Handle Inserts on 4000 series models)
(Handle Inserts included on 80000 series models)
Models: 4570, 4570CP, 4570P, 4570W,
T4570, T4570CP, T4570CPC, T4570P, T4570PM,
T4570PMC, T4570ST, T4570STP, T4570W, R4570,
R4570P, R4570PM, R4570BP, R4570CG, R4570ST,
RT4570, RT4570P, RT4570PM, RT4570BP,
RT4570CG, RT4570ST, RT4570NL, A4570, A4570P,
A4570PM, A4570BP, A4570CG, A4570ST, A4570NL,
84240, 84240W, 84240PM, 84244, 84246, 84250,
84250PM, 84250ST, 84252ST, 84254
Valve: 9000, 69000
for illustrated parts and handle options
NOTE: For deck thickness 1-3/8" - 3", use service kit #
115001. Valves install through 1-1/4" dia. hole.
NOTE: See reverse side
SPOUT
AERATOR
ESCUTCHEON
2-1/2" DIAMETER
8" (203mm) - 16"(406mm) CENTERS
3 3/4"
(95mm)
ESCUTCHEON
2-3/16" (56mm)
DIAMETER
3 1/16"
(78mm)
HOT
INLET
CRITICAL DIMENSIONS
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
HANDLE INSERTS
(NOT FURNISHED)
HOSE
ASSEMBLY
(DO NOT SCALE)
COLD
INLET
4-1/2"
(113mm)
3-7/16"
(87mm)
1-1/4" (32mm) MAX.
DECK THICKNESS
5-1/8"
(130mm)
1-1/4"
(32mm)
Rev. 11/01
Loading...