Moen PS624E User Manual
Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
THIN WALL APPLICATION
THICK WALL APPLICATION
FOR MORE INFORMATION CALL: 1-800-465-6130
www.moen.com
LEVEL™POSI-TEMP
®
Single-Handle Tub/Shower (Trim Only)
Models: T2703 series
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes showerhead, arm, flange and diverter spout
OPERATION
• Handle operates counterclockwise through a 270˚ arc
with off at 6 o’clock and maximum hot at the 9 o’clock
position. Shut off in clockwise direction
• Adjustable temperature limit stop to control maximum
hot water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to ± 3°
FLOW
• Showerhead limited to 2.5 gpm max. (9.5 L/min)
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B-125.1,
ICC A117.1 and all applicable requirements
referenced therein
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
2" CC (51mm)
7" (178mm)
ESCUTCHEON
DIAMETER
7-1/2"
(191mm)
MIN
2-1/2"
(62.9mm)
3-5/8”
93mm
HOT
INLET
COLD
INLET
1 7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
4-1/2" (114mm)
WALL OPENING
TUB RIM
8-13/16”
(224mm)
6-7/16"
(165mm)
FACE OF STUD
FLOOR
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
2-1/2" MAX. (63mm)
C
L
1-3/8" (35mm)
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
45" (1143mm)/
TUB SHOWER
6'-6"
(1981mm)
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
FLOOR LINE
3/16" (typ) (5mm)
PLASTER GROUND
1-1/2"
(38mm)
C
L
1-3/8"
(35mm)
PLASTIC
TUB/SHOWER
SURROUND
Loading...