Moen NDPF2401 Specifications

Arlys™ Technical Specication

Double Paper Holder Y5788

Stock Numbers:

Y5788CH – Double Paper Holder

Chrome Finish

Y5788BN – Double Paper Holder

Brushed Nickel Finish

Y5788BL – Double Paper Holder

Matte Black Finish

Dimensions:

2-1/8"
54mm

10-5/8"
270mm

2-3/4"
70mm

Materials:

Double Paper Holder is constructed of zinc.

Installation Instructions:

1. Remove the mounting post from the body by loosening the set screw.

2. Position the mounting post on the wall at desired location with notch facing
down.

3. One at a time, place each anchor screw through the mounting post, centered in
the large hole. Using a Phillips screwdriver, turn the anchor screw while applying
pressure. Screw will self drill and tap into drywall. Do not over tighten.

4. Place assembly over the mounting post, setscrew facing down.

5. Tighten set screw.

Cleaning Instructions:

To preserve the ne nish of this product, clean only with a soft damp cloth.

Dry well. Do not use commercial or abrasive cleaners.

Stock Number: __________________Double Paper Holder
By Moen Incorporated

25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM

©

2021 Moen Incorporated. Moen is a registered trademark and Aryls is a trademark of Moen

Incorporated. All rights reserved.