Page 1
DESCRIPTION
• Metal construction with varoius finishes idenditfied by suffix
• Shower Only kits include showerhead, arm, flange
• Tub/shower kits include showerhead, arm, flange and diverter spout
OPERATION
• Handle operates counterclockwise through 150˚
arc with off at 6 o’clock and maximum hot at the 1
o’clock position. Shut off in clockwise direction
• Adjustable temperature limit stop to control
maximum hot water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to +/ 3.6°F (+/-2°C)
FLOW
• EP suffix models contain a showerhead
limited to 1.75 gpm (6.6 L/min)
CARTRIDGE
• 1212 Ceramic Disk Temperature Control Cartridge
• Non-metallic/non-ferrous and plastic material
• Accommodates back to back installations
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-1251, ASSE 1016/ASME A112.1016/CSA B.125.16 and
all applicable requirements reference therein
• Moen’s M-CORE™ pressure balance system is capable
of meeting the pressure and temperature variation
requirements of ASSE 1016/ASME A112.1016/CSA
B125.16 when tested as low as 1.3 gpm (4.9 L/min)
• EP suffix models are third party certified to EPA WaterSense®
• ADA compliant for lever handle
WARRANTY
• Lifetime limited warranty against material or manufacturing defects
to the original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
10”
(254mm)
Specifications
Arris™ M-CORE™ 2-Series
Single-Handle Tub/Shower Trim
MODELS:
Valves: U130 Series and U140 Series
UTS22003EP Series - Tub/Shower Trim
UTS22002EP Series - Shower Trim
UTS22001 Series - Valve Trim
NOTE:
18-1/2”
(470mm)
2-1/2”
(64mm)
1” (25mm) MAX.
wall thickness
Rev. 04/21
6-1/2”
(165mm)
2-1/2”
(64mm)
CRITICAL DIMENSIONS DO NOT SCALE
FINISHED
WALL
7-1/8”
(181mm)
3-1/4”
(82mm)
3-7/8”
(98mm)
6” - 11”
(152mm - 279mm)
1-800-BUY-MOEN
www.moen.com
Loading...