Page 1
There is more than 1 version of this model.
Page down to identify the version you have.
DESCRIPTION
• Duralock™ quick connect system
• Metal construction with various finishes identified by suffix
• Hot and cold indicators available
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Water usage is limited to these maximum flow rates as indicated by the
corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
• 1234™ Duralast™ cartridge
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all
applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Spec i fi ca tions
ARRIS™
Two Handle Widespread
Lavatory Faucet
Models: TS43002 series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THROUGH 3 HOLES, 1-1/8” MIN. DIA.
NOTE: FOR DECK THICKNESS 1-1/2” to 3”, USE SERVICE
KIT #175709. VALVES INSTALL THROUGH 1-1/4”
DIA. HOLE.
2-11/16"
(68mm)
3-3/32"
(79mm)
M•pact System
Handle Base
2" (51mm)
8"
(203mm)
Spout Base
2-13/32" (61mm)
1-1/4” (32mm) MAX.
DECK THICKNESS
CRITICAL DIMENSIONS
(DO NOT SCALE)
5-5/64
(129mm)
"
(103mm)
4-3/64"
5-3/4"
(146mm)
1-11/32"
(34mm)
1-3/8
(35mm)
"
Rev. 5/19
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Page 2
5-3/4"
DESCRIPTION
• Quick connect system
• Metal construction with various finishes identified by suffix
• Hot and cold indicators available
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1, and
all applicable requirements referenced therein including NSF61/9 & 372
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the original
homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Spec i fi ca tions
ARRIS™
Two Handle Widespread
Lavatory Faucet
Models: TS43002 series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THROUGH 3 HOLES, 1-1/8” MIN. DIA.
3-3/32"
(79mm)
2-11/16"
(68mm)
Handle Base
2" (51mm)
8"
(203mm)
Spout Base
2-13/32" (61mm)
5-5/64"
(129mm)
1-1/4” (32mm) MAX.
DECK THICKNESS
4-3/64"
(103mm)
(146mm)
1-11/32"
(34mm)
"
1-3/8
(35mm)
Rev. 8/15
M•pact System
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Loading...