Page 1
DESCRIPTION
• Brass Construction
• 1/4 turn stops on each inlet
• Available with ½" CC/IPS, PEX, Cold Expansion PEX, or CPVC Connections
• Shower outlet matches inlet connection type
• Tub outlet is CC/IPS
OPERATION
• Supplied Flush Plug allows testing up to 200 PSI with air (300 PSI water)
• Installation in thin or thick wall applications
CARTRIDGE
• Cartridge is supplied in the M-CORE™ Trim Kit
STANDARDS
• Third party certied to meet ASME A112.18.1/CSA B125.1,
and all applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
M-CORE™
4 Port Rough-In Valve With 1/4 Turn Stops
Models: Inlet Connection
U140CIS CC/IPS
U140XS PEX
U140CXS Cold Expansion PEX
U140VS CPVC
4-7/8" (124mm)
U140CIS & U140XS VALVES
5" (127 mm)
U140CX VALVES
6-5/8" (168 mm)
U140VS VALVES
M•pact System
THICK WALL
1/4" (6mm) MIN.
1" (25mm) MAX.*
FINISHED WALL
PLASTER GROUND
4-1/4"
(108mm)
DIAMETER
WALL OPENING
45-48"
(1143mm-1219mm)
SHOWER ONLY
32" (813mm)
TUB/SHOWER
FLOOR
* Walls thicker than 1" (25mm) require optional extension kit.
CRITICAL DIMENSIONS
(DO NOT SCALE)
2-3/4"
(70mm)
STRINGER
1" (25mm)
INLET & OUTLET
THIN WALL
3-3/4" (95mm)
WALL
OPENING
FLOOR LINE
LESS THAN 1/4" (6mm)
PLASTER GROUND
1-1/2" (38mm)
INLET & OUTLET
C
L
2-1/2" (64mm)
TUB/SHOWER
SURROUND
5/20
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Loading...