Page 1
DESCRIPTION
• Brass Construction
• 1/4 turn stops on each inlet
• Available with 1/2" CC/IPS, PEX, Cold Expansion PEX
• Transfer valve outlets match inlet connection type
• No tub outlet
• 2 Function / 3 Function transfer valve
OPERATION
• Supplied Flush Plug allows testing up to 200 PSI with air (300 PSI water)
• Installation in thin or thick wall applications
• The valve is factory set for 2 independent showering devices but can be
adjusted to accommodate 3 independent showering devices
CARTRIDGE
• Mixing Cartridge is supplied in the M-CORE 3-Series trim kit
• Includes 2 function / 3 function ceramic disk cartridge for transfer valve
STANDARDS
• Third party certied to meet ASME A112.18.1/CSA B125.1,
and all applicable requirements referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
THICK WALL
1/4" (6mm) MIN.
1" (25mm) MAX.*
M-CORE™
With Integrated 2 Function /
3 Function Transfer Valve
Models: Inlet Connection
U232CIS CC/IPS
U232XS PEX
U232CXS Cold Expansion PEX
3-5/8" (92 mm)
U232XS & U232CXS VALVES
3-1/2" (89mm)
U232CIS VALVES
7-1/2"
7-1/2"
(190mm)
(190mm)
4-1/8"
(105mm)
4-7/8" (124mm)
U232CIS &
U232XS VALVES
5" (127 mm)
U232CXS VALVES
M•pact System
FINISHED
WALL
PLASTER
GROUND
FLOOR
5/8"
(16mm)
OUTLETS
2-3/4"
(70mm)
STRINGER
1"
(25mm)
INLETS
(1118mm)
(108mm)
44"
4-1/4"
TUB/SHOWER
SURROUND
PLASTER
GROUND
* Walls thicker than 1” (25mm) require optional extension kit.
CRITICAL DIMENSIONS
(DO NOT SCALE)
THIN WALL
LESS THAN 1/4" (6mm)
1-7/8" (48mm)
1-1/2"
(38mm)
INLETS
OUTLETS
2-1/2" (64mm)
5/20
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Loading...