DESCRIPTION
• Brass swivel ball assembly
OPERATION
• One function, rain
• For best performance, mount rainshower directly overhead
FLOW
• Showerhead limited to 2.5 gpm (9.5 L/min) MAX at 80 psi
• EP sux models are limited to 1.75 gpm (6.7 L/min) MAX at 80 psi
STANDARDS
• Third party certied to meet ASME A112.18.1/ CSA B125.1 and all
applicable requirements referenced therein
• EP sux models are third party certied to WaterSense®
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
IMPORTANT CLEANING & CARE INSTRUCTIONS:
Moen recommends cleaning this rainshower with a mild soap, rinsing
thoroughly with warm water and drying with a clean, soft cloth. Never use
cleaners containing abrasives *including abrasive sponges or steel wool),
ammonia, bleach or sodium hypochlorite, organic solvents (e.e. alcohols)
or other harsh chemicals (e.g. lime scale removers) to clean the nish,
as they may damage the nish. Failure to comply with these cleaning
instruction my void Moen’s warranty.
Specifications
12" One Function Overhead
Mount Rainshower
Models: S1002 series
EP Suffix
Models Only
4/18
12"
(305mm)
2-3/8"
(60mm)
5/16"
(8mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
12"
(305mm)
www.moen.com
Loading...