Moen MOE9126 Specifications

Download

Page 1

Beleld™ Accessories Technical Specication

Tank Lever YB6401

Stock Numbers:

YB6401CH – Tank Lever

Chrome

YB6401BN – Tank Lever

Brushed Nickel

YB6401ORB – Tank Lever

Oil Rubbed Bronze

Materials:

Tank Lever is constructed of zinc.

The arm mechanism is constructed of plastic.

Dimensions:

4.45"

113mm

1.7"

43mm

10"

255mm

Installation Instructions:

1. Remove existing tank lever.

Remove the arm mechanism from the new tank lever by loosening nut.

Unscrew the tank nut. The thread for the tank nut is a left handed thread.

4. Position the new tank lever through the tank hole. The tank lever handle should be pointing away from the toilet bowl.

5. Tighten nut. Depending on the curvature of the tank, there might be a slight gap between the outside of the tank and the base of the lever.

6. Place the arm mechanism on the tank lever post. Adjust the arm up or down as needed. Tighten nut to secure the arm in place.

7. Adjust the arm mechanism from side to side as needed. Make sure

the arm does not come into contact with the tank wall or the ush

mechanism. Tighten screw to lock the arm in place

8. Attach the apper valve chain to one of the provided slots on the

arm. Be sure to eliminate any slack in the chain.

9. Make sure no water is leaking through the apper when the handle is in its normal position (not ushing).

Cleaning Instructions:

To preserve the ne nish of this product, clean only with a soft damp

cloth. Dry well. Do not use commercial or abrasive cleaners.

Stock Number: _______________________ Tank Lever By Moen Incorporated

25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070

CORPORATE HEADQUARTERS: (800) 321-8809 • FAX: (800) 848-6636 INTERNATIONAL: (440 ) 962-2000 • FAX: (440) 962-2726 CUSTOMER SERVICE (USA): 800-882-0116 • FAX: (888) 379-2720