Moen MOE9111 Specifications

Beleld™ Accessories Technical Specication

Double Towel Bar YB6422

Stock Numbers:

YB4622CH – Double Towel Bar

Dimensions:

Chrome

YB4622BN – Double Towel Bar

Brushed Nickel

YB4622ORB – Double Towel Bar

Oil Rubbed Bronze

2.43"

62mm

24"

610mm

2.60"

66mm

Materials: Installation Instructions:

Towel Bar posts are constructed of

zinc. Bars are aluminum.

Directions below are for installation into drywall. If installing product into a stud, use

the wood screws only.

1. Remove mounting posts from the product assemblies by loosening each set
screw.

2. Position the mounting template on the wall in the desired location

3. Using a level, align the template and tape it to the wall.

4.

Drill two 5/16" holes at each mounting post location that corresponds to your product.

5. We recommend using the horizontal holes for drywall installation.

6. Remove the template from the wall.

7.

Fold ends of the plastic toggle anchor together and insert into each hole in the wall.

8. Lightly tap anchors until ush with the wall.

9.

One at a time, insert plastic pin into each anchor and lightly tap to activate anchor.

10. Remove pin and repeat on all anchors.

11. One at a time, place each mounting post over anchors (notch facing downward)
and insert screws through post into anchors.

12. Tighten screws.

13. Place assembly

5.25"

133mm

3.76"

95mm

4.75"

121mm

Cleaning Instructions:

To preserve the ne nish of this product, clean only with a soft damp

cloth. Dry well. Do not use commercial or abrasive cleaners.

Stock Number: __________________ Double Towel Bar
By Moen Incorporated

25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM
©Copyright Moen Incorporated